Click on this link to download the flash player. (DOWNLOAD FLASH NOW)
The Syrus GPS intelligent tracking and reporting device is the evolution of
DCT's quad-band track, trace and locate in vehicle telematic products.
Designed for the most demanding fleet management operation, offering scalability, compatibility and added functionality to a simple cost effective track-n-trace operation. Syrus Features
- Programmable Event-Action Engine / Flexible Customization: this easy to configure event engine, continuously monitors threshold
status related to time, distance, turns, speed, motion, shock, acceleration, landmarks, timers, inputs, GPS and GPRS conditions and generates
reports and actions to drive the GPRS communication or the store and forward log and to setup output status.
- GPS and GSM Internal Antennas: high sensitivity built in internal antennas for quick installation, with connector for optional external GPS antenna for enhanced FIX precision. - Motion and Shock Detection / Driver Performance / Tow Detection: fully integrated 3-axis accelerometer for easy to configure motion and acceleration based events. - Multiple Input/Output Options with One-Wire Compatibility: offering 3 inputs, 1 ignition input, 1 ADC input, 1 one-wire input and 2 outputs, makes it ideal to control, manage and monitor fuel sensors, doors, panic buttons, vehicle immobilizer, siren, lights, driver identification with Dallas keys or any other compatible telematics application. - Internal Back-up Battery: allows for autonomous operation for up to 10 hours of full tracking and extended functionality depending on motion and power management setup, (low current consumption). Reverse polarity protection and thermal shutdown for enhanced battery life. - Automatic power saving mode: based on the status of the ignition input and motion detector. - External Integration Capabilities: easy to integrate with the Garmin Fleet Management Protocol, serial satellite modems for back up communication, bar code scanners, mobile data terminals, fuel management sensors and/or other external data devices. - Remote Administration and Firmware Update: fully configurable over the network via GPRS and/or SMS. Also, operational firmware can be upgraded over the air (FOTA), as well as over the RS232 port. - Multiple Communications and Network Protocols: select from TCP/IP and/or UDP/IP and/or SMS/SMPP and reporting to up to 5 different control centers either IP and/or DNS with auto switching from GPRS to SMS and defining primary and alternative communications option. Alternate support between ASCII and/or Binary GPS protocol for efficient communication cost reduction management. - Store and forward log: up to 7200 tracking events are stored in case of communication failure. - World Class Technical Support: a professional team of certified Field Application Engineers supporting the most demanding special reporting configurations will help our customers to design the ideal script. 
e-trackTM is a portable battery-powered GPS-tracking device designed
to interact remotely with Automated Location systems (Tracking
Servers) or with end-users by using the GSM/GPRS network as communication media.
e-trackTM may be installed on a vehicle or carried by a person
whose geographical position and/or state is desired to
be remotely monitored. It can also be attached to cargo material to
secure assets.
GPRS SPECIFICATIONS - Frequencies: 850, 900, 1800, 1900 Mhz.
- Full duplex communication. - Automatic start up. - SIM Card: 1.8 Volts and 3 Volts. - SIM Card PIN: Programmed by user one time, automatically introduced onward. PIN saved on Non-Volatile memory - Receiver parameters: - GSM850 Reference Sensitivity: -104 dBm Static and TUHigh. - E-GSM900 Reference Sensitivity: -104 dBm Static and TUHigh. - DCS1800 Reference Sensitivity: -102 dBm Static and TUHigh. - PCS1900 Reference Sensitivity: -102 dBm Static and TUHigh. - Transmitter parameters: - Maximum output power (EGSM and GSM850): 33 dBm +/- 2dB. - Minimum output power (EGSM and GSM850): 5 dBm +/- 5dB. - Maximum output power (GSM1800 and PCS1900): 30 dBm +/- 2dB. - Minimum output power (GSM1800 and PCS1900): 0 dBm +/- 5dB. GPS SPECIFICATIONS - Supports SBAS (WAAS, EGNOS).
- Frequency: L1 type (1575.42 MHz). C/A code. - Sensitivity: -150 dBm Tracking, -142 dBm Acquisition. - Channels: 12 channel simultaneous operation. - Protocol: TAIP(ASCII). - Update rate: 1Hz. - Horizontal Accuracy: <2.5 meters (50%), <5 meters (90%) [SBAS]: <2 meters (50%), <4 meters (90%) - Accuracy Velocity: 0.06 m/sec. - PPS: +/-100 nanoseconds RMS. - Adquisition: Cold Start - 39 seconds , Warm Start - 35 seconds , Hot Start - 3.1 seconds , Reacquisition - 2 seconds.
This mobile asset tracking & reporting communicator is ideal for commercial fleet management or private vehicle location systems. It combines the precision of GPS the power of 2.5 and 3 G wireless networks. Available in GPRS and CDMA 800, 900, 1800 or 1900 MHz bands. Antares is compatible with virtually any fleet management software.
Antares Features
- 50 Configurable Trigger Events: in a intelligent event engine tool where “the configuration limit is your imagination” (geo-fences, time & distance, speed limits, time windows and much more specific user events).
- Turn by Turn Reports: By tracking the vehicle’s heading change, a turn-by-turn report can be achieved. This leads to detailed tracking of a vehicle’s route and also to a reduction of unnecessary reports on long straight roads and highways. - GPS Back Log and Acceleration: Positive and negative accelerations can be monitored to generate reports on large gas pedal usage and breaking/crashing conditions. Also a GPS Back Log that stores all data received from the internal GPS module at a 1-second rate can be retrieved at any time, for example when a large negative acceleration (possible crash) is detected. With this log, the last minute of the vehicle’s location/speed can be examined second by second. - FOTA – Firmware Over the Air with a single command. - DOTA – Download Over the Air - easily control your unit over GPRS or SMS. - Intelligent RS232 port (DB9 connector) for MDT – Mobile Data Terminals, Bar Code Scanners, Satellite Modems, RFID Readers, OBDII –CAN-Bus devices. - UDP and/or TCP communications protocol available. Up to 10 different IP and/or DNS + 5 different SMS and/or SMPP destination addresses. - 4 Inputs – 4 Outputs / 1 Analog input / 1 Ignition Input. - Audio / Voice port. - Optional Internal back-up battery. - Standard TAIP ASCII GPS Protocol: makes it easy to integrate in any AVL/mapping server solution. - Store and Forward: 1200 events - Aluminum housing. |
CUSTOMER TESTIMONIALSWithin 3 months of first testing a sample Antares tracking unit, the majority of our 18 distributors worldwide are now using the Antares GPS from DCT as their regular tracking device for customer vehicles. The low price, combined with exceptional functionality and ease-of-use has made Antares the standard for 3dtracking.
|
|---|
